Greek’s Garage original project video: June 6, 2019 • Guide expanded: November 21, 2026
Can you paint bathroom tile instead of replacing it?
Yes—if the tile is sound and the coating is approved for that surface. A tub-and-tile refinishing kit is a cosmetic option for certain bathroom wall tiles, tubs and surrounds. It's not a repair for loose tile, failed waterproofing, mold behind the wall, or water damage.
In my original Greek’s Garage project, I used a Rust-Oleum Tub & Tile Refinishing Kit to give older tile a different look without tearing it out. Watch the video above for the actual project rather than treating this page as a frame-by-frame transcript.
In the original 2019 video description, I mentioned paying about $26 at my local hardware store at the time and warned that the odor was strong. That was my price in 2019, not a current price or a guarantee about everyone’s results.
Best forCompatible tubs & wall tile
Water exposureWait 3 days to cure*
Not intended forTile floors
*Rust-Oleum's current product guidance; follow the directions supplied with your specific kit.
Is this kit right for your bathroom?
Rust-Oleum lists ceramic, porcelain, fiberglass, cast iron, steel and certain acrylic surfaces as compatible with its Tub & Tile Refinishing Kit. Examples include tubs, shower walls, backsplashes and sinks. The manufacturer says not to use this kit on tile floors.
Potentially a good fit
- Wall tile or a bathtub with an intact, stable surface
- A cosmetic color refresh without demolition
- A bathroom you can keep out of use while the coating cures
Address these issues first
- Loose, cracked or water-damaged tile
- Leaks, failing grout or damaged waterproofing
- Tile floors or surfaces excluded by your kit's instructions
Source: Rust-Oleum's current product guidance ↗
How to prepare and refinish tile
This is a general manufacturer's-workflow summary, not a claim that I used every step or tool in the video. Product formulations and label requirements may change—your actual kit instructions take priority.
- Inspect the tile and surrounding area.
Don't coat over loose tile, active leaks or damaged waterproofing. Repair those first.
- Remove old caulk and protect nearby fixtures.
Follow the kit directions for removing hardware, masking walls and protecting counters and floors.
- Clean thoroughly.
Remove soap scum, grease, mildew and residue using the sequence of products described on the label. Rinse and dry as instructed; do not mix cleaners.
- Prepare the surface for adhesion.
Use the abrasive preparation or sanding method specified for your kit and surface. Remove dust before coating.
- Mix and apply the coating.
The two-part product needs proper mixing and application within its stated working time. Follow the label for coats and recoat intervals.
- Ventilate and let it cure.
Keep the space safely ventilated and follow the kit's protective-equipment instructions. Rust-Oleum currently says to wait three days before exposing the finish to water.
- Re-caulk and return the area to service.
Follow the product directions for caulking and use. Do not rush water exposure or use before the specified cure time.
Safety first: My video description specifically notes strong fumes. Follow the product label and safety data sheet for ventilation and appropriate respiratory, skin and eye protection. Keep people and pets away from the work area as directed. If safe ventilation can't be achieved, postpone the project.
Common questions about Rust-Oleum Tub & Tile
Can you paint bathroom wall tile instead of replacing it?
Yes, some intact and compatible wall tile can be refinished with a suitable coating. The surface must be properly cleaned and prepared. Loose or water-damaged tile still needs repair or replacement.
Can I use this kit on a bathroom tile floor?
No. Rust-Oleum says its Tub & Tile Refinishing Kit is for tubs and wall tile, not tile floors. Choose a floor-rated coating if that's your project.
How long until I can use the shower?
Rust-Oleum's current guidance says to let the coating cure for three days before exposing it to water. Follow the exact directions on the kit you purchase.
Does the product have a strong odor?
It did during my original project; I called that out in the 2019 video description. Take ventilation and safety requirements seriously.
How much did the Rust-Oleum kit cost you?
I reported paying around $26 at a local hardware store in 2019. That is historical, not today's price; use the product link to check current pricing.
Will painted tile fix cracked grout or water leaks?
No. Refinishing is cosmetic and doesn't replace waterproofing or structural repairs. Resolve any underlying moisture problems first.